How to Get Torque Pro to Read Air to Fuel Ratio
#ane 
Posted 04 July 2018 - 09:44 AM
Hi All,
On Smiley'southward advice I'one thousand currently using a bluetooth OBD2 reader and torque app on an android phone to monitor SC intake temps on track... I tin besides see coolant on this besides.
I can also see the selection to monitor fuel pressure on the free torque app not certain on AFR etc..
Probably a very stupid question only is anyone using torque app to monitor AFR or fuel pressure and could it exist useful to check the fuel system afr etc?
Firthy
I tin run across an selection to monitor O2 Sensor 1 Equivalence Ratio - Is that AFR?
Edited by Firthy, 04 July 2018 - 09:49 AM.
#2
siztenboots
-
-
- 26,624 posts
RaceMode
- Gender: Not Telling
- Location: Surrey
- Interests: french maids
Posted 04 July 2018 - 09:50 AM
but google for the torque pro .apk and install the total version , on the VXT this gets y'all extras like the map sensor
#3
Posted 04 July 2018 - ten:56 AM
Thank you Steve,
Just downloaded the Torque Pro App which has AFR measured and AFR Commanded.
Information technology also stores info like the highest intake temp which could exist useful 
Does anyone know if these functions work?
Can anyone recommend what to go along an heart on fuel pressure vs fuel pressure rail etc?
Firthy
Edited past Firthy, 04 July 2018 - 10:57 AM.
#4
smiley
-
-
- 10,539 posts
Thetan level 15
- Gender: Male
- Location: Netherlands
Posted 04 July 2018 - 11:12 AM
When torque Is started, and yous browse for a new value, and it lights up lite green information technology should be available to view.
These are the ones that worked on my NA:
http://www.vx220.org...ner-multi-gauge
Edited by smiley, 04 July 2018 - 11:14 AM.
#five
Posted 04 July 2018 - 12:01 PM
Thanks Smiley so no AFR etc
#6
smiley
-
-
- 10,539 posts
Thetan level 15
- Gender: Male
- Location: Netherlands
Posted 04 July 2018 - 01:00 PM
Those screenshots are now 4 years old.
Non sure if a newer torque releases more info from our vx ecu today?
#7
Posted 04 July 2018 - 01:22 PM
Cool I will give it a go this evening !!!
#8
Posted 04 July 2018 - 02:47 PM
I deceit recall existence able to get afr's concluding year on Torque Pro when i had my VX (which was one bit of data i really wanted), i am pretty sure its zip to exercise with torque just the data the ecu puts out to the obd.
#ix
Posted 04 July 2018 - 04:xv PM
I don't see how it tin show the AFR equally the ECU isn't continued to a broad band sensor?
All information technology can probably show is the target AFR.
More modern cars which run wideband as std can probably testify AFR.
#10
Posted 04 July 2018 - 06:17 PM
Hi Oakmere,
Thank you for your aid, I knew someone would be a long to put me straight.
Every bit you say I can get communicated AFR, simply patently non measured AFR 😂
Tin I ask another stupid question I approximate obd uses the lambda to piece of work out the air fuel ratio.
Could you therefore display the lambda and get a reading?
I tin come across the 02 sensor value with engine off is 447.0 can either of these be used in a similar way?
The other value I can become is timing accelerate could I monitor anything with that?
Distressing for the stupid questions!!
#11
Posted 04 July 2018 - 09:48 PM
And so afterward some research I tin log the two O2 sensors, this is measured by voltage and then loftier voltage equals rich.
This style I can monitor that the machine isn't running lean at WOT?
I can also log brusque term fuel trim which should remain -0.9 - +0.9 is that correct?
I tin also monitor the timing advance - would this be useful at all?
Does that make sense?
Whatsoever advice e'er appreciated 👍
Here's the link I constitute
https://youtu.be/DZPyu9WUglY
Edited by Firthy, 04 July 2018 - 09:57 PM.
#12
dominik
-
-
- 69 posts
Member
- Gender: Male person
Posted 05 July 2018 - 06:58 AM
Does the torque app show boost pressure on the vxt?
#13
siztenboots
-
-
- 26,624 posts
RaceMode
- Gender: Not Telling
- Location: Surrey
- Interests: french maids
Posted 05 July 2018 - 08:thirty AM
yes if yous install the pro version from .apk file
information technology used to be on the bones free one, until they removed it and started charging for the app
#14
smiley
-
-
- 10,539 posts
Thetan level 15
- Gender: Male
- Location: Netherlands
Posted 05 July 2018 - 08:57 AM
If there is one app that is worth paying for, Torque is certainly it.
Peanuts for what yous become.
Source: http://www.vx220.org.uk/forums/topic/149006-torque-obd-reader-afr/
0 Response to "How to Get Torque Pro to Read Air to Fuel Ratio"
Post a Comment